Zippy

Zippy is CHG's redone SunFire X4600 workhorse server. Most functionality of the old Zippy has been shifted over to other systems. Zippy now mainly functions as scratch space (raida) and backup space (raidb). Zippy also houses small experimental/personal VMs.

General Info

System Name:	zippy.chg.ucsb.edu
IP:	128.111.236.130
IPMI IP:	(need info)
Location:	EH ERI Server Room
UCID #:	088000240
Grant #:	(need info)
Serial #:	(need info)
General Purpose:	Workhorse server
Purchase Date:	(need info)
Delivery Date:	(need info)
Vendor:	(need info)
Contract #:	(need info)
Support Expires:	(need info)

System Configuration

• OS Type: Unix
• OS Version: FedoraCore24
• CPU info: 32xAMD 2.86GHz (may only be 16 with two cores)
• Chassis Specs: SunFire X4600
  • Defunct RAID chunks (gibber, jabber, jower [HD: 25TB, RAID6])

Network

• NIC speed: Gigabit
• MAC Address - eth0: 00:14:4F:D1:E9:10
• MAC Address - eth1: (need info)

Storage

• Memory: 160GB (DDR2?)
• HD: 25TB, RAID6

Services

As of the FedoraCore24/ZFS rebuild, zippy is mainly a scratch/backup space (including BackupPC) that also hosts personal/experimental VMs.

Formerly Lis, CSCD1 (most tasks shifted to rain or ubu).

Notes on October 2013 Redo

Troubleshooting

Timed zippy's startup at two and a half minutes (booted much faster when we removed some of the RAM/CPUs). Had some graphical issues - screen would go black before kickstarter could really initialize. The system seemed to lock up when trying to access disks or the SAS configuration utility with a live (but blank) screen. After swapping around drives and taking out various cards, switched to a standalone monitor as opposed to KVM, which resolved the issue.

Day 1

First attempt (specifying a build on sda,sdb) came up with error about not enough disk space, so tried (sdb,sdc) but that failed with no device found. Added the --all to the initpart in kickstart and then it hung at the storage device initialization. Left for 45 minutes with blank "live" screen, but it was still unbootable afterwards. Subsequent attempts did the same.

We tried a number of variations and had one pass where CPUs 8,9,10,11,12,14 were hung. The boot process on the following pass seemed much faster for some reason. Had a few other passes where there were other odd little inconsistencies.

We tried a subsequent pass with all but two of the CPU cards pulled and another with the fiber channel controllers pulled, with no change in results.

Day 2

Attempt to access the LSI card BIOS, but got same black screen hang when the config utility started (like the one we got when the jumpstart install got to the disk config).

Tried disabling PXE boot stuff, but after a full power cycle, it seemed like it started attempting the PXE boots again.

ILOM Info

Serial Connection

Connect using 9600,N,8,1

cd /SP/users/root
show
set password=newpass

Networking

Set the pending network settings (you can't set the regular ones)

cd /SP/network
set pendingipaddress=128.111.101.114
...

Now commit the changes

set commitpending=true

Check that settings updated

show

Reboot the Service Processor (equivalent to a full power up (i.e.: plugging in initially))

reset /SP

To stop/start the system

stop /SYS
start /SYS

To get at console (NOTE: Had issues escaping the console)

start /SP/console

Go in via SSH and kill the console

stop /SP/console

Network Management Port

Once configured:

ssh root@address

then things are just like the serial console...

Links

• ILOM help: [1]
• Notes ganked from [2].

Notes on August 2016 Redo

Coming soon!

VMs

System Name:	IP:	Notes:
helmet	128.111.236.136	Moved to ubu.
fez	N/A	No longer in use - nuked.
chg-ewx	no longer on zippy, back on ubu	EWX host, temporarily lived on zippy

Notes

• Zippy was moved from EH 1609 to the sixth floor EH ERI server room on November 23rd, 2015. Its domain (and the domain on its VMs) were updated from geog.ucsb.edu to chg.ucsb.edu at that time.
• RMA'd [?] drive to HGST (Hitachi) on July 7th, 2014 (used ubu shelf spare to replace).
• RAM errors have been a known issue for a while. According to mtc, "It's ECC so they're only "notices" and the system deals safely w/ the issue. It's technically feasible to track them down, probably a good idea to do so, but can be difficult to do, especially give the number of sticks in zippy." Libby 13:07, 3 August 2016 (PDT)
• In October of 2016, zippy's two ZFS RAIDs (/raida and /raidb) were combined into a single RAID (/raid).
• After the revamping of zippy with FedoraCore24 and ZFS, the package "libXp-1.0.2-6.fc24.x86_64" (dnf install libXp-1.0.2-6.fc24.x86_64) was needed to get ENVI/IDL working. This package is generally required for fresh installs. Libby 09:37, 2 November 2016 (PDT)